FILA EPOXYOFF, Epoxy Grout Haze Remover, Effectively Removes Epoxy Residue, The Product Can Be Applied on Vertical Surfaces, 1 QT

See the attached picture. Inside the blue line has the grout haze removed. This is an amazing product and I would highly recommend it if you have grout haze! It takes a lot of scrubbing but its worth every minute. Directions say to use a paint brush to apply and an abrasive pad to scrub it. I would say we got more coverage than what the bottle says. I drizzled some on the floor and took a small paint roller to spread it evenly and that worked great. Make sure you don’t leave dry spots when rolling it. It worked great to cover about 40 to 50 Sq ft with Epoxy Off at a time then then wait about 10-15 minutes and cover another area then start scrubbing the first area. Keep rotating areas and you’ll be on a roll. I also used the finest grade of steel wool (from Amazon) and I liked that better than the abrasive pad for the first go around. After scrubbing with the steel wool, we wiped up what we could with Terry cloth (from Amazon) then went over it with the abrasive pad (from Amazon) cleaned up some more with Terry cloth and then we washed up the rest of the residue by hand with hot water and white vinegar mixed 50/50. After all of this we mopped the floor with a household degreaser (mixed with water) and then with hot water and vinegar mix again and it looks great. I’m sure there other processes that work too but this worked great for us. If you’re afraid of work, then this product isn’t for you. If you don’t mind using some elbow grease and crawling around on hands and knees then you will be glad you did it!